Plasma immobilization of azobenzene dye on polyamide 6 polymer
Koo, J. H. Polymer Nanocomposites: Processing, Characterization, and Functions. (McGraw-Hill Schooling, 2019).
Feldman, D. Polyamide nanocomposites. J. Macromol. Sci. Half A Pure Appl. Chem. 54, 255–262 (2017).
Nair, S. S. & Ramesh, C. Research on the crystallization conduct of nylon-6 within the presence of layered silicates utilizing variable temperature WAXS and FTIR. Macromolecules 38, 454–462 (2005).
Peng, X. et al. Form reminiscence impact of three-dimensional printed merchandise based mostly on polypropylene/nylon 6 alloy. J. Mater. Sci. 54, 9235–9246 (2019).
Yanilmaz, M., Dirican, M. & Zhang, X. Analysis of electrospun SiO2/nylon 6,6 nanofiber membranes as a thermally-stable separator for lithium-ion batteries. Electrochim. Acta 133, 501–508 (2014).
Ding, R. & Bowler, N. Permittivity and electrical breakdown response of nylon 6 to chemical publicity. IEEE Trans. Dielectr. Electr. Insul. 22, 1151–1160 (2015).
Mei, Z. & Chung, D. D. L. Thermal historical past of carbon-fiber polymer-matrix composite, evaluated by electrical resistance measurement. Thermochim. Acta 369, 87–93 (2001).
Sahu, S. Ok., Mahto, R. P. & Pal, Ok. Investigation on mechanical conduct of friction stir welded nylon-6 utilizing temperature signatures. J. Mater. Eng. Carry out. 29, 5238–5262 (2020).
Savarino, P. et al. Results of components on the dyeing of nylon-6 with dyes containing hydrophobic and hydrophilic moieties. Dye. Pigment. 47, 177–188 (2000).
Awaja, F., Gilbert, M., Kelly, G., Fox, B. & Pigram, P. J. Adhesion of polymers. Prog. Polym. Sci. 34, 948–968 (2009).
Ihalainen, P. et al. Affect of floor properties of coated papers on printed electronics. Ind. Eng. Chem. Res. 51, 6025–6036 (2012).
Amirilargani, M., Sadrzadeh, M., Sudhölter, E. J. R. & de Smet, L. C. P. M. Floor modification strategies of natural solvent nanofiltration membranes. Chem. Eng. J. 289, 562–582 (2016).
Shin, J., Liu, X., Chikthimmah, N. & Lee, Y. S. Polymer floor modification utilizing UV therapy for attachment of natamycin and the potential functions for standard meals cling wrap (LDPE). Appl. Surf. Sci. 386, 276–284 (2016).
Ayrilmis, N., Jarusombuti, S., Fueangvivat, V. & Bauchongkol, P. Impact of thermal-treatment of wooden fibres on properties of flat-pressed wooden plastic composites. Polym. Degrad. Stab. 96, 818–822 (2011).
Maroofi, A., Navab Safa, N. & Ghomi, H. Atmospheric air plasma jet for enchancment of paint adhesion to aluminium floor in industrial functions. Int. J. Adhes. Adhes. 98, 102554 (2020).
Xiao, X. et al. Argon plasma therapy to tune perovskite floor composition for top effectivity photo voltaic cells and quick photodetectors. Adv. Mater. 30(9), 1705176 (2018).
Bergmann, J. B. et al. Polymerization-induced wrinkled surfaces with managed topography as slippery surfaces for colorado potato beetles. Adv. Mater. Interfaces 7(12), 2000129 (2020).
Pankaj, S. Ok., Wan, Z. & Keener, Ok. M. Results of chilly plasma on meals high quality: A overview. Meals 7, 4 (2018).
Wei, X. et al. CF 4 plasma floor modification of uneven hydrophilic polyethersulfone membranes for direct contact membrane distillation. J. Memb. Sci. 407–408, 164–175 (2012).
Jaleh, B., Parvin, P., Wanichapichart, P., Saffar, A. P. & Reyhani, A. Induced tremendous hydrophilicity resulting from floor modification of polypropylene membrane handled by O2 plasma. Appl. Surf. Sci. 257, 1655–1659 (2010).
Tušek, L., Nitschke, M., Werner, C., Stana-Kleinschek, Ok. & Ribitsch, V. Floor characterisation of NH3 plasma handled polyamide 6 foils. Colloids Surf. A 195, 81–95 (2001).
de Groot, G. J. J. B., Hundt, A., Murphy, A. B., Bange, M. P. & Mai-Prochnow, A. Chilly plasma therapy for cotton seed germination enchancment. Sci. Rep. 8, 14372 (2018).
France, R. M. & Quick, R. D. Plasma therapy of polymers: The consequences of power switch from an argon plasma on the floor chemistry of polystyrene, and polypropylene. A high-energy decision X-ray photoelectron spectroscopy research. Langmuir 14, 4827–4835 (1998).
Attri, P., Arora, B. & Choi, E. H. Retraction: Utility of plasma: A brand new highway from physics to chemistry. RSC Adv. 7(26), 15735–15735 (2017).
Owen, M. J. & Stasser, J. L. Plasma therapy of polydimethylsiloxane. Am. Chem. Soc. Polym. Prepr. Div. Polym. Chem. 38, 1087–1088 (1997).
Randeniya, L. Ok. & De Groot, G. J. J. B. Non-thermal plasma therapy of agricultural seeds for stimulation of germination, removing of floor contamination and different advantages: A overview. Plasma Course of. Polym. 12, 608–623 (2015).
Kostov, Ok. G., Nishime, T. M. C., Castro, A. H. R., Toth, A. & Hein, L. R. O. Floor modification of polymeric supplies by chilly atmospheric plasma jet. Appl. Surf. Sci. 314, 367–375 (2014).
Shaw, D., West, A., Bredin, J. & Wagenaars, E. Mechanisms behind floor modification of polypropylene movie utilizing an atmospheric-pressure plasma jet. Plasma Sources Sci. Technol. 25(6), 065018 (2016).
Chan, C. M., Ko, T. M. & Hiraoka, H. Polymer floor modification by plasmas and photons. Surf. Sci. Rep. 24, 1–54 (1996).
De Smet, L. et al. Plasma dye coating as easy and broadly relevant process for dye immobilization on polymeric supplies. Nat. Commun. 9(1), 1–11 (2018).
Wong, J. Ok. H., Tan, H. Ok., Lau, S. Y., Yap, P. S. & Danquah, M. Ok. Potential and challenges of enzyme integrated nanotechnology in dye wastewater therapy: A overview. J. Environ. Chem. Eng. 7, 103261 (2019).
Roy, U. et al. Evaluation on the decolourization of textile dye (reactive yellow) utilizing Pseudomonas sp. immobilized on fly ash: Response floor methodology optimization and toxicity analysis. J. Environ. Handle. 223, 185–195 (2018).
Priimagi, A., Kaivola, M., Virkki, M., Rodríguez, F. J. & Kauranen, M. Suppression of chromophore aggregation in amorphous polymeric supplies: In direction of extra environment friendly photoresponsive conduct. J. Nonlinear Decide. Phys. Mater. 19, 57–73 (2010).
Yager, Ok. G. & Barrett, C. J. Novel photo-switching utilizing azobenzene purposeful supplies. J. Photochem. Photobiol. A Chem. 182, 250–261 (2006).
Merino, E. & Ribagorda, M. Management over molecular movement utilizing the cis-trans photoisomerization of the azo group. Beilstein J. Org. Chem. 8, 1071–1090 (2012).
Nançoz, C. et al. Affect of the hydrogen-bond interactions on the excited-state dynamics of a push-pull azobenzene dye: The case of Methyl Orange. Phys. Chem. Chem. Phys. 20, 7254–7264 (2018).
Cho, E. N., Zhitomirsky, D., Han, G. G. D., Liu, Y. & Grossman, J. C. Molecularly engineered azobenzene derivatives for top power density solid-state photo voltaic thermal fuels. ACS Appl. Mater. Interfaces 9, 8679–8687 (2017).
Al-Bataineh, Q. M. et al. Kinematics of photoisomerization processes of PMMA-BDK-MR polymer composite skinny movies. Polymers (Basel). 12(6), 1275 (2020).
Han, G. G. D., Li, H. & Grossman, J. C. Optically-controlled long-term storage and launch of thermal power in phase-change supplies. Nat. Commun. 8, 1446 (2017).
Steyaert, I., Vancoillie, G., Hoogenboom, R. & De Clerck, Ok. Dye immobilization in halochromic nanofibers by mix electrospinning of a dye-containing copolymer and polyamide-6. Polym. Chem. 6, 2685–2694 (2015).
Gao, T., Xue, Y., Zhang, Z. & Que, W. Multi-wavelength optical information processing and recording based mostly on azo-dyes doped organic-inorganic hybrid movie. Decide. Categorical 26, 4309 (2018).
Samai, S., Bradley, D. J., Choi, T. L. Y., Yan, Y. & Ginger, D. S. Temperature-dependent photoisomerization quantum yields for azobenzene-modified DNA. J. Phys. Chem. C 121, 6997–7004 (2017).
Deloncle, R. & Caminade, A. M. Stimuli-responsive dendritic constructions: The case of light-driven azobenzene-containing dendrimers and dendrons. J. Photochem. Photobiol. C Photochem. Rev. 11, 25–45 (2010).
Zakerhamidi, M. S. et al. Isotropic and anisotropic surroundings results on the UV/vis absorption spectra of three disperse azo dyes. J. Mol. Liq. 154, 94–101 (2010).
Zibaei, R., Zakerhamidi, M. S., Korram, S. & Ranjkesh, A. Results of polarized mild on the optical and self-oscillation behaviors of liquid crystal community polymers. J. Mater. Chem. C 9, 14908–14915 (2021).
Seyednoruziyan, B. et al. Bettering the optoelectronic effectivity of novel meta-azo dye-sensitized TiO2 semiconductor for DSSCs. Spectrochim. Acta. Half A Mol. Biomol. Spectrosc. 247, 119143 (2021).
Aamoum, A. et al. Time-resolved photoluminescence and optical properties of a particular natural azo dye. Decide. Quantum Electron. 52, 35 (2020).
Pavia, D. L., Lampman, G. M. & Kriz, G. S. Introduction to Spectroscopy third edn. (Thomson Studying Inc., 2001).
Siow, Ok. S., Britcher, L., Kumar, S. & Griesser, H. J. Plasma strategies for the era of chemically reactive surfaces for biomolecule immobilization and cell colonization: A overview. Plasma Course of. Polym. 3, 392–418 (2006).
Hosseini, S., Ibrahim, F., Djordjevic, I. & Koole, L. H. Latest advances in floor functionalization strategies on polymethacrylate supplies for optical biosensor functions. Analyst 139, 2933–2943 (2014).
Švorčík, V. et al. Modification of floor properties of excessive and low density polyethylene by Ar plasma discharge. Polym. Degrad. Stab. 91, 1219–1225 (2006).
Moghadamzadeh, H., Rahimi, H., Asadollahzadeh, M. & Hemmati, A. R. Floor therapy of wooden polymer composites for adhesive bonding. Int. J. Adhes. Adhes. 31, 816–821 (2011).
Bagiatis, V., Critchlow, G. W., Value, D. & Wang, S. The impact of atmospheric stress plasma therapy (APPT) on the adhesive bonding of poly(methyl methacrylate) (PMMA)-to-glass utilizing a polydimethylsiloxane (PDMS)-based adhesive. Int. J. Adhes. Adhes. 95, 102405 (2019).
Das, D. et al. Understanding of the kinetic stability of cis- isomer of azobenzenes by kinetic and computational research. ChemistrySelect 5, 13957–13962 (2020).
Mahimwalla, Z. et al. Azobenzene photomechanics: Prospects and potential functions. Polym. Bull. 69, 967–1006 (2012).
Mitus, A. C., Pawlik, G., Kajzar, F. & Grote, J. G. Kinetic Monte Carlo research of diffraction grating recording/erasure in DNA-based azo-dye techniques. Nanobiosyst. Course of. Charact. Appl. 7040, 70400A (2008).
Yager, Ok. G. & Barrett, C. J. Azobenzene polymers for photonic functions. Sensible Mild. Mater. Azobenzene-Comprise. Polym. Liq. Cryst. https://doi.org/10.1002/9780470439098.ch1 (2008).
Wazzan, N. A., Richardson, P. R. & Jones, A. C. Cis-trans isomerisation of azobenzenes studied by laser-coupled NMR spectroscopy and DFT calculations. Photochem. Photobiol. Sci. 9, 968–974 (2010).
Christy, A. A., Kvalheim, O. M. & Velapoldi, R. A. Quantitative evaluation in diffuse reflectance spectrometry: A modified Kubelka–Munk equation. Vib. Spectrosc. 9(1), 19–27 (1995).
